Patricia's modeling projects

ladypatricia
New Member

Posts: 15

Patricia's modeling projects Jul 29, 2018 14:29:09 GMT Admin The Keeper likes this

Quote

Post by ladypatricia on Jul 29, 2018 14:29:09 GMT

So those of you that visited the older forums might remember I at one point posted some images of 3d models I'd been working on.
Since then a lot has happened and the projects kind of ran out of steam for a while, as work and RL devoured most of my spare time.
Things have changed a bit now and I'm slowly getting back into working and developing for KK again.

So my older models were made with Gmax, but I've since moved over to Blender, which is a quite powerfull program.
I'll probably publicly release some of my work on the NWN-vault, however there'll be some work/ projects unqiue to KK.

On that note LoTC and I have been tossing around the idea of allowing unique house models for players.
More ideas that's been discussed are unique weapon-, VFX-, item- and placeable- and head models for KK.
We'll see what I manage to find time for.

With that being said the posts below will be used to showcase my work to give you an idea of what me and LoTC would like to make
available for KK.

ladypatricia
New Member

Posts: 15

Patricia's modeling projects Jul 29, 2018 14:36:30 GMT Admin The Keeper likes this

Quote

Post by ladypatricia on Jul 29, 2018 14:36:30 GMT

Alchemy project:

For those of you who remember my alchemy project might recall I made a stab at a very "mix- and match friendly" array of placeables.
While the idea looked good on paper, it became quite apparent adjusting the location of small placeables in the toolset were impractical
and tiresome.

So I reworked it all and turned them more into groups or larger placeables.
So here are some images of what the new alchemy placeables looks like:

Placeable props

Close up
In order of appearance -
Large Brewer
Large Iron Retort
2 different alchemy groups
3 different groups of bottles
2 different groups of fluid tubes
2 different tables with alchemical props
1 empty table (standard bioware model)

Last Edit: Jul 29, 2018 15:59:41 GMT by ladypatricia

ladypatricia
New Member

Posts: 15

Patricia's modeling projects Jul 29, 2018 14:38:44 GMT

Quote

Post by ladypatricia on Jul 29, 2018 14:38:44 GMT

Black-/Weapon-/Armor smith

My old smith project had a few models, of which some were once again the "mix-match" kind. yet again I've opted to go for more "loaded" tables, racks
and so on. Those of you who're familiar with the Witcher 3 game may recognize some inspiration taken from it.
This project I will probably revisit later on at some point since I'd like to create more armor oriented pieces. But until then, enjoy!

Smithy 1
2 anvils (1 ordinary and one "thin", both loaded with a few hammers and pincers)
1 barrel of metal scraps
2 Bellows (1 hanging and 1 prone)
1 Grindstone
1 Cooling tray
1 fire bed
1 large vice
1 small vice

Smithy 2
Several chains hanging both vertical and horizontal. One with a hook and one is an enlarged version of an already existing model.
2 sets of Chisels ( hanging and prone)
4 sets of hammers ( 2 hanging, 2 prone)
2 Pliers (1 prone, 1 standing/ leaning)
1 set of tongs laying prone
1 rack of tongs
1 rack of pliers

Smithy 3
2 Sledgehammers ( 1 prone, 1 leaning)
1 large group of pliers (prone)
2 large heaps of scrapmetal
1 barrel with arrows
1 row of wall mounted bows
3 sets of wall mounted heavy crossbows
3 sets of light cross bows on stands
2 sets of quivers

Smithy 4
1 rack of axes
1 table w. axes
2 sets of wall mounted axes
1 rack of warhammers and maces
1 table w. warhammers and maces
1 set of wall mounted pikes
1 rack of polearms
1 rack of pikes
1 set of wall mounted halberds

Smithy 5
3 sets of sword scabbards (2 heaps, 1 stand)
2 sets of greatswords on wall-mounted boards
2 sets of longswords on wall-mounted boards
1 rack of swords
1 table w. great- and longswords
1 set of wall mounted swords
2 sets of longswords in stands.

Smithy 6
3 shield racks ( 1 w. round medium shields, 1 w. tower shields, 1 empty)
5 different wall-mounted tower shields
5 different wall-mounted medium shields

Last Edit: Sept 10, 2018 16:11:51 GMT by ladypatricia

ladypatricia
New Member

Posts: 15

Patricia's modeling projects Jul 29, 2018 15:57:24 GMT Admin The Keeper likes this

Quote

Post by ladypatricia on Jul 29, 2018 15:57:24 GMT

City silhouette project

(( UPDATED !! ))

I have a kind of love-hate relationship to the standard NWN1 city tileset. Either it is due to its age, design or simply just me, but I find it
to look odd and lack a lot of imaginative features of a "fantasy city landscape".
However, despite the many alternatives to this tileset available out there -of which some are quite amazing- it has one thing going for it;
the fact that it fits with everything else standard nwn1. Better looking tilesets tend to contrast too much against PC and NPC models and so on for me to feel they're immersive.

But enough of me ranting. My "solution" to the problem is of course to make placeable models to decorate the city landscape.
The ones shown in the linked images below are what's been made so far. Some of them I'll revisit and remake or polish up a little as time allows.

Update 2. (2018-11-08) Unfortunately I haven't had too much time as of late to model but here's at least something:
I took inspiration from Zwerkules' Medieval City Tileset for this update and made a few buildings based on his work. Also there are some fences and 2 stand-alone versions of houses from the standard city tileset.

Update 1. (2018-09-29) More or less all the square and round towers have been revamped. There are a few removals and a few additions as well.
More is coming though....moar !!

First off some arcs, tunnels, balconies, market stalls and fences. Some of these are taken directly out of the city tileset and turned into placeables.
City models 1

City models 1b (Update !)
City models 1c (Update !)

Then some houses
City models 2

City models 2b (Update !)

Here are some house outcrops and "roof add-ons"
City models 3

Round towers (some of them have "smaller" versions as well)
City models 4

Square towers
City models 5 (Update !)

A pair of house facades to fill that otherwise "empty" tile.
City models 6

Here are ideas for some unique shop buildings.
Store 1 (Buppi's Candy store)
Store 2 (Firenza's Fashions)

More to come....

Last Edit: Nov 8, 2018 14:15:37 GMT by ladypatricia

ladypatricia
New Member

Posts: 15

Patricia's modeling projects Jul 31, 2018 8:11:13 GMT Admin The Keeper likes this

Quote

Post by ladypatricia on Jul 31, 2018 8:11:13 GMT

Wicca/ Herbalist project

My idea for this project was to create placeables to decorate a typical "herbalist" or "witch/ old hag" hut, with herbs hanging from the ceiling and on the walls,
pots with other herbs, bottles and jars and so on and so forth.

Down below is a series of images of the models that I've made.

Wicca 1
Werewolf head on a plaque (to add a scary touch)
3 shelfs with bottles and other stuff.
3 groups of bowls with herbs (back)
3 groups of various bottles (front)
A set of small rune stones
3 groups of jars with various preserved content (right-most backend)
1 small table pot.

Wicca 2
6 large clay pots. (4 with herbs, 2 with lids)
4 large flasks
2 groups of small clay pots
1 large pot on a chain

Wicca 3
4 hanging pots with herbs
2 groups of 4 clay pots with herbs
4 hanging flasks
4 sacks with herbs

Wicca 4
2 danglies with bones and herbs
4 groups of hanging herbs
1 small basket with fire wood

Wicca 5
3 walls of roots
2 floors of matching roots

Wicca 6
2 sets of Ivy vegetation for wall (left and center foreground)
4 sets of hanging roots and herbs

Last Edit: Aug 15, 2018 11:04:53 GMT by ladypatricia

dominique
New Member

Posts: 1

Patricia's modeling projects Oct 2, 2018 11:09:36 GMT via mobile

Quote

Post by dominique on Oct 2, 2018 11:09:36 GMT

Hi,

they look all great! Especially the house Project got my attention! Looking forward to them. Also I am excited to see more Wiccha Like houses, especially if you go out into the nature, like that house in the Forest, in which also the ropers live. Or in Conjumnori

ladypatricia
New Member

Posts: 15

Patricia's modeling projects Oct 5, 2018 18:59:58 GMT

Quote

Post by ladypatricia on Oct 5, 2018 18:59:58 GMT

Oct 2, 2018 11:09:36 GMT dominique said:

Hi,

they look all great! Especially the house Project got my attention! Looking forward to them. Also I am excited to see more Wiccha Like houses, especially if you go out into the nature, like that house in the Forest, in which also the ropers live. Or in Conjumnori

I've been thinking about making a "thatch" hut or similar. However there're already a few such models available
in other haks out there. We'll see what I'll come up with.

ladypatricia New Member Posts: 15	Patricia's modeling projects Nov 8, 2018 14:16:48 GMT Admin The Keeper likes this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by ladypatricia on Nov 8, 2018 14:16:48 GMT City Silhouette UPDATED as of 2018-11-08

Nwnkissmet

Patricia's modeling projects

Post by ladypatricia on Jul 29, 2018 14:29:09 GMT

Post by ladypatricia on Jul 29, 2018 14:36:30 GMT

Post by ladypatricia on Jul 29, 2018 14:38:44 GMT

Post by ladypatricia on Jul 29, 2018 15:57:24 GMT

Post by ladypatricia on Jul 31, 2018 8:11:13 GMT

Post by dominique on Oct 2, 2018 11:09:36 GMT

Post by ladypatricia on Oct 5, 2018 18:59:58 GMT

Post by ladypatricia on Nov 8, 2018 14:16:48 GMT

Quick Reply